The Best Way To Fix a Speakerphone: step-by-step guide


You’re a speaker at a convention, and you have an audience of people who are all interested in what you have to say. But they can’t hear you over the sound of their smartphones ringing! There must be a better way, right? And that better way is to fix the speakerphone! clean my speaker  In this guide, we’ll show you how to fix a speakerphone so that it works reliably for everyone in your audience.

How to Fix a Speakerphone.

A speakerphone is a device that helps you communicate through spoken commands. It is usually found on cell phones, laptop computers, and other mobile devices. The speakerphone allows you to talk without having to take your hands off the controls of your device.

To fix a speakerphone, first make sure that the phone is working properly. Check the battery and charger for compatibility, and make sure that all cords are connected properly. If all of these steps still don’t work, then you may need to call customer service or replace the phone entirely.

If you can’t fix your speakerphone by yourself, then you may need to call customer service or replace it entirely. Repairing a speakerphone can be an expensive undertaking, so it’s important to do your research before calling customer service!

How to Fix a Speakerphone.

There are a few things you can do to fix a speakerphone on your computer. First, check to see if the speakerphone is broken or has been damaged in some way. If it is, then you will need to replace it. Second, check to see if the speakerphone cord is frayed or has been cut. Third, try using a hairdryer on the speakerphone to heat up the plastic frame and make it more flexible. Finally, use a vacuum cleaner and bucket to suck out any built-up dust and dirt that may have collected on the phone’s internals.

If you Still cannot fix your speakerphone after following these steps, then you may need to take it in for repair. A representative from your local service provider may be able to help you out with this issue.

How to Fix a Speakerphone.

If your speakerphone is not working correctly, you may need to replace the speakerphone. To do this, you will need to first remove the old speakerphone and then replace it with a new one.

If you are replacing a voice-activated speakerphone, be sure to read the instructions carefully before starting. Replacement parts for voice-activated speakers can vary depending on which brand of speakerphone you purchase and which model of machine you have.

Remove the old speakerphone

To remove the old speakerphone, take off the protective cover that surrounds the phone and expose the electronic chip inside. Once removed, disconnect all cables from the phone and computer (you may have to unscrew several screws). Next, unscrew four screws on top of the phone using a Phillips screwdriver located at either end of this screwdriver handle. Lift up and discard both plastic covers that protect the back panel of the phone.

Remove two white electrical connectors from the motherboard that plug into the wall outlet (look for a small round connector at one end). Disconnect power cord from wall outlet if present

Now take off two black plastic hardware seals from back panel reveal two metal screws hidden inside these metal seals

Replace Speakerphone: Step by Step Guide

  1. Insert new black electrical connector into motherboard; attach power cord to wall outlet if present
  2. Locate two white electrical connectors on PCB – one near front left corner and one near back right corner
  3. Ply down metal screws until they line up with black screws hidden inside plastic seals
  4. Replace old Speakerphone in reverse order as shown in picture:
  5. Replace speakerphone cover with new one
  6. Reattach power cord to wall outlet if present


Speakerphones can be a major inconvenience for consumers. In order to fix the issue, it is important to first understand what a Speakerphone is and how to fix it. Additionally, it is important to know how to fix a Speakerphone in order to avoid any further issues.

Leave a Reply

Your email address will not be published. Required fields are marked *